1. Turn the gas on at the key valve
2. Position the control knob with the word “pilot” at 12 o’clock
3. Press in on the control knob
4. Using a long lighter (not a match), hold the flame under both the pilot head and the
thermocouple until you see the pilot flame.
5. Hold the knob in for approx. 30 seconds.
6. Release the control knob. If the pilot stays lit, proceed to the next step. If not, keep repeating steps 3 – 5 until the pilot light stays on. You may need to hold the button in for up to 2 minutes.
7. Once the pilot stays lit, move the control knob to the “On” position. The main valve to the burner pan will now open and the pilot will ignite the gas.
8. If you cannot get the pilot to light, a service call will be required.
